Archive for November, 2010

Metal Roof Maintenance

Monday, November 15th, 2010

Tips for Easy Metal Roof Maintenance

Metal roof maintenance is relatively easy for an aluminum roofing system. If you keep up with the maintenance the roof, (what little there is), this type of roof should last you 30 or more years.  Metal Roofing Systems of Madison, Wisconsin (serving Southern Wisconsin and the Milwaukee metro) has roofing systems, panels and metal shingle roof systems designed for residential and commercial usage that will last 100 years!  Metal Roofing Systems also provide bids, estimates and information for bidding processes for commercial buildings and historic preservation or restoration on churches and houses of worship; and we are major roofing contractor for residential properties in Madison, Milwaukee, Stoughton, Racine, Waunakee and many other Southern Wisconsin communities.

Contact Our DIY Program to Learn How to Maintain Your Metal Roof

Metal Roofing Systems from WisMetalRoof are Eco Friendly

Things You’ll Need for Metal Roof Maintenance

Here are some additional upkeep suggestions for the DIY metal roof maintenance man or woman:

Roofing Cement, Roofing Cement, Latex Paints, Paintbrushes, Washers, Paintbrushes, Solder, Soldering Guns/Irons

Roof Maintenance Tips

1.    Be careful not to let metals of different types touch each other. Chemical reactions between different materials can invite corrosion.

  1. Keep paint touched up to keep rust at bay.
  2. Repair holes and open seams as soon as possible.
  3. Cover very small holes with roofing cement. Solder a patch of the same metal over larger holes.
  4. Only use screws made of the same metal as the roof.
  5. Always use screws with washers and install them in raised areas, not low areas where water can pool and leak.

Our Metal Roof Maintenance Products are the Best in the Industry – Contact Metal Roofing Systems to Place an Order Today.

Pre-Treated Metal Roofing Products and DIY Treatments

Surprisingly most metal roofs are either Galvanized, aluminized, or Galvalume coated from the manufacturer. These pre-coated materials are relatively maintenance-free, in general. It is not uncommon for manufacturer’s of metal roofing products to warrantee their products for 50 years or more.

If your metal roof is not pre-treated, one of the best performing finishes for metal roofing used in metal roof maintenance is Polyvinylidene Fluoride (PVDF). PVDF is said to add to the overall strength of the metal, have high weather resistance, chemical and corrosive resistance, UV light protection, and fungi resistance. If you use a PVDF treatment, you will only have to check it every 9 years to see if it needs reapplied.

Most of the other metal roofing finishes — urethane, plastisol, acrylic and silicone — require your attention every 3 to 5 years. Often PVDF only needs reapplication every 15-20 years, making it by far, the best choice to use on your metal roof. Keep in mind…a properly maintained metal roof can often outlast the structure it is built upon.

Metal Roof Maintenance – Contact Metal Roofing Systems for Installation and Service in Southern Wisconsin!

Call Metal Roofing Systems – 866-947-6382
Madison, Wisconsin – 608-663-2687
Milwaukee, Wisconsin - 414-727-1810

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Metal Roof Maintenance, Metal Roofing Sheets, Metal Roofing Systems | No Comments »

Metal Roof Construction

Monday, November 15th, 2010

Metal Roof Construction Made Easy

Metal Roof Construction Contractors – Homes, Businesses and Churches

When properly estimated, there is very little waste material in a new metal roof construction project for residences, churches, houses of worship or for flat roof commercial buildings. Metal roofing is ordered per each piece, whether it is in sheet form, trim or ridge material.  Metal roofing sheets are available from Metal Roofing Systems (Madison and Milwaukee) and cut to exact lengths, allowing for less on-the-job fabricating or finishing during installation at a home, business, church or other house of worship.

Your New Metal Roof Will Look Great for Decades and Carries a Non-Pro-Rated Warranty for as Long as You Own our Home!

DIY Metal Roof Construction and Installation Projects

When working with metal roofing materials there are several things that you should know before you begin. Metal roofs require a certain amount of skill when it comes to installation and layout. Nonetheless, the average do-it-yourself homeowner can tackle these issues with a little preparation.

Metal roofing can either be installed on top of existing shingles–providing that the shingles are not lumpy–or directly onto a plywood roof. Make sure that you install felt paper beneath the metal if you are covering plywood. Measure off one end of your roof, usually 40 inches–metal is 42 inches wide and it laps by 2 inches, and snap chalk lines as reference lines for the first two pieces, one on each side of the gable for a gabled roof. Attach the metal using color-matched screws that have rubber washers.

Contact Our DIY Program to Learn How to Construct Your Metal Roof

The screws should be inserted in the valley and not the ridge of the metal pattern. Lap the following pieces of metal over the previous pieces by 2 inches. After all the metal has been installed, attach the ridge cap on the ridge of the roof, or if you have a flat roof, attach wall flashing and drip edges where necessary. You metal roof supply store (www.wismetalroof.com) will direct you to the correct metal supplies.

Metal roof construction materials come in an array of profiles – tile, shake, shingles, and corrugated panels, to name a few – and in materials ranging from aluminum to copper to sheet metal and steel.  A variety of color coatings are also available to help you create the look you want with the durability and sustainability you need.

Metal Roof Construction/Installation from Metal Roofing Systems in Madison Are Eco Friendly

Our Metal Roofs Come in Styles and Colors to Fit Any Home. Contact Us to Request Metal Roof Construction Today.

Call Metal Roofing Systems at (866-947-6382)
608-663-2687 in Madison
414-727-1810 in Milwaukee

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Metal Roofing Systems, Metal Roofs, metal roof construction | No Comments »

Corrugated Metal Roofing Prices

Monday, November 15th, 2010

Understanding Corrugated Metal Roofing Prices

If you are shopping for a new roof, you may be blown away to learn that corrugated metal roofing prices are significantly more than the cost of asphalt roofing and many other traditional roofing options. What offsets the price is the fact that Corrugated metal roofing has a tremendous chance of outlasting the traditional roof by more than 80 years, which means that you will replace your roof only once in your lifetime, more than likely. During the same 80 years, you will have replaced an asphalt roof or other type roof 2 or 3 times, at least (many estimates on asphalt roofing are 12 to 17 years).

With the peace of mind that comes from its long lasting durability, metal roofing may end up being a lifetime decision that makes good financial sense.

Metal Roofing Systems Are Eco Friendly by Reflecting Light and Reducing Waste from Replacing Roofs Periodically

Corrugated Metal Roofing Prices – Factors to Consider

You need to have an in depth knowledge of the product for understanding its price. Corrugated metal roofs nowadays don’t bear that old-fashioned look. They have vivid colors and are presented in various styles. These are just some of the characteristics to consider when determining the price of the materials, let us consider other aspects.

  • Roof Area: The larger the roof area, the higher the price. It is generally calculated on the per square foot basis. The total for corrugated metal roof prices (panels or shingles) will be a product of the per square foot cost of the metal roof panel, multiplied by the roof area.

Attend Metal Roofing Systems’ DIY Seminar to Learn How to Install Your Own Corrugated Metal Roof – Contact MRS


  • New Metal Roof Materials: In the recent past, new corrugated metal roofing materials have been introduced to the market. These materials are far more durable, fire resistant, and have better radiation reflection properties (sunlight reflection) than the traditional materials that used in the past. It is also a very common trend that metal roof material manufacturers, nowadays, manufacture metal roof materials with a variety of factory-finished granulated stone top coats.
  • Longevity and Durability: This is another important factor. Check for the longevity and durability of the material. It is a well-known fact that corrugated roofing is made from long lasting materials.

Our Corrugated Metal Roofing Prices Are the Best in the Industry – Contact Metal Roofing Systems to Place an Order Today.

Throughout Southern Wisconsin – 866-947-6382
Call 608-663-2687 in Madison
Call 414-727-1810 in Milwaukee

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Corrugated Metal Roofing Prices, Corrugated Sheet Metal Roofing, Metal Roofing Systems, Metal Roofs | No Comments »

Permanent Roof

Thursday, November 11th, 2010

A Permanent Roof vs. a Conventional Roof

Permanent Roofing Alternative to Asphalt Shingles

A sheet metal roof is considered a permanent roof–it can last a hundred years. The advantages of a metal roof far outweigh conventional asphalt shingle roofing benefits on a number of different counts, such as:

Expected life – Properly installed, a metal roof should last as long as the house, completely sealing out water, surviving high winds, and easily shedding snow.

Weight - Compared with tile at 750 pounds per square (an area equal to 100 square feet) or concrete tile at 900 pounds per square, metal roofing is lightweight. Most varieties run from 50 to 150 pounds per square.

A Metal Roofing Systems’ Roof Will Stay Looking Great for Decades and Carries a Non-Pro-Rated Warranty for as Long as You Own our Home!

Speed & ease of roofing installation - Most metal roofing materials come in sheets. An accomplished contractor can install these quickly. You can also buy single metal shingles that are relatively easy to install. Unlike three-tab asphalt shingles wherein each piece must be individually placed and nailed.

Fire resistance - Because metal roofs are noncombustible, they’re given a Class A fire rating (the most resistant). Part of a roof’s classification depends on materials beneath the surface that could ignite in intense heat, so some metal roofs applied over an old combustible roof, such as wood shingles, may be rated lower.

A Permanent Roof Will Add Instant Real Value to Your Home. A Temporary Roof Will Add Nothing to the Equity of Your Home. Contact Metal Roofing Systems Today for More Information.

Heat conduction - Metal reflects radiant heat from the sun, minimizing mid-day heat gain. Though the material itself is low in insulation R-value, many systems utilize a dead-air space between the metal and roof deck to increase energy efficiency.

Minimal roof pitch - Most permanent roofing systems can be installed on gently pitched roofs without danger of leaking. Minimum roof pitch is 3-in-12 (the roof rises 3 inches for each horizontal foot).

There are so many more advantages of installing a permanent roof to your home that you should no longer even consider any other alternative.

We Specialize in Permanent Metal Roofs. Contact Us Today to Place Your Order with Wisconsin’s Leading Metal Roofing Systems Provider.

Toll-Free Calls – 866-947-6382
Local Madison Calls - 608-663-2687
Local Milwaukee Calls – 414-727-1810

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Metal Roofing Systems, Metal Roofs, Permanent Roof | No Comments »

Metal Seam Roofing

Thursday, November 11th, 2010

Metal Seam Roofing Is an Architectural Statement for Your Home

Metal Roofing Alternatives

In a nutshell, metal seam roofing (also called standing seam metal roofing) is a side-by-side formation of vertically standing or laying metal panels that are secured in place by concealed fasteners. The panels are joined together at the sides, with the connecting or overlapping panel lock forming a seam as a connecting point between the panels.

Metal Roofing Systems Carries “Green” Metal Roofing Systems Made From 95-98% Recycled Aluminum

Residential Metal Seam Roofing

Standing seam metal roofing was once used solely for industrial use in the extreme climates of New England and the Deep South. Recently, it has become an architectural statement that has become popular for many roofing needs. Homeowners who are striving to attain the modern look for their homes demand metal seam roofs. These new modern-styled roofs help to bring that contemporary fresh look to the home.

Benefits of Metal Seam Roofing

Properly installed, a metal roof is virtually maintenance free, fire resistant, and often able to last for the life of the structure upon which it rests. One of the key benefits of standing seam metal roofs is the ease with each they shed the snow and ice. This helps to keep your roof light, prevent ice-dams, and gives greater roof ventilation.

Metal Roofing Systems Offers Permanent Metal Roofing Solutions in Many Styles and Colors to Fit Your Home.  Call Us for a Quote.

Different Types of Metal Seam

There are 3 types of standing seam metal roofing systems.

  • 1.    The most common is the field locked standing seam that uses special locking tool to adjoin the panels in the field.
  • 2.    The second type is a snap lock standing seam that locks the panels together when one side is adjoined with the one next to it.
  • 3.    And finally there is also standing seam shingle based panels, that have the look of standing seam, but in reality they are the vertical shingle panels.

Standing seam can be rolled out in the field, it can be prefabricated and shipped to the plant, or it can be custom bent at a sheet metal fabrication site. Metal roofing materials are now available in a wide range of colors and styles so is suitable for any home.

We Specialize in Metal Seam Roofing so Our Knowledge and Experience Will Be of Great Value to You.  Order All Your Roofing Supplies Direct from Metal Roofing Systems

866-Wis-Metal (866-947-6382)
608-663-2687 Madison
414-727-1810 Milwaukee

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Metal Roofing Sheets, Metal Roofing Systems, Metal Roofs, Metal Seam Roofing | No Comments »

Metal Roofing Sheets

Thursday, November 11th, 2010

Metal Roofing Sheets Are Both Durable and Versatile

Metal Roofing Systems – Serving Southern Wisconsin

Metal roofing sheets are a material that has grown increasingly popular for residential roofing in recent years. It begins as “flat stock” that is formed into metal roof panels and components. Manufacturers can also apply a finish or coating that will increase the life of these roofing sheets.

Sheet metal roofing is a very versatile building material. It is durable. It can be used on residential, commercial, industrial or agricultural buildings. It is not only used in roofing applications, but also may be used as a wall covering. There are many different profiles and styles available to fit most building situations.

Contact Our DIY Program to Learn How to Install Metal Roofing Sheets

Versatile Roofing Materials

By using metal roofing materials, various shapes can be combined for aesthetic impact and increase the value of your property. Using the same material and same color but different shapes can have an impact on curb appeal and building value. Alternatively different roofing sheets can be used to create interesting color combinations.

The two main metal roofing systems are named after the method of joining panels together: “Standing-seam roofing” has a self-sealing, raised seam, and “batten roofing” employs a wider cover cap. Special matching metal parts are made for ridges, hips, edges, and connections.

Metal Roofing Systems from WisMetalRoof are Environmentally Friendly

Manufactured metal roofing sheets are sold in large panels—normally 26-gauge coated steel that weighs about a pound per square foot. Other materials include painted aluminum, solid copper, zinc alloys, and terne-coated stainless steel. Because of the large panel size, this roofing works best on large, unbroken expanses, like barns and one-story ranch houses.

Metal Roofing Materials

Typically, sheet metal roofing materials are priced by the square foot. Prices vary widely, depending on the material and finish, ranging from a low of about $1.50 per square foot to about $6 per square foot. Figures typically include panels, fastening clips, caps, and all trims and flashing. If you ask for ballpark square-foot prices, be sure they include all the necessary parts.

Our Metal Roofs Come in Styles and Colors to Fit Any Home. Contact Us to Place an Order with Metal Roofing Systems Today

866-947-6382
608-663-2687 Madison
414-727-1810 Milwaukee

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Metal Roofing Sheets, Metal Roofing Systems, Metal Roofs | No Comments »

Standing Seam Metal Roofing

Thursday, November 11th, 2010

Standing Seam Metal Roofing Basics

Metal Panel Roofing Advantages

Standing seam metal roofing is constructed of many interlocking panels that run vertically from the roof’s ridge (the top of the roof) to the eaves. The interlocking seam where two panels join together is raised above the roof’s flat surface, allowing water to run off without seeping between panels.

Standing seam metal roofs come in many shapes and sizes. In some instances, the vertical panels are cut to length at a factory and delivered to the job site. Other types are shaped and cut right on the job site using portable equipment. Other options include standing seam “shingles” that arrive prepackaged (typically in three- to five-foot lengths) and are installed in a staggered pattern for visual effect.

Our Standing Seam Metal Roof Will Look Great for Decades and Carries a Non-Pro-Rated Warranty for as Long as You Own our Home!

Installation Methods and Metal Roofing Attributes

Two types of methods are commonly used to secure the panels to the roof sheathing: (1) hidden fasteners are secured to the raised portion of each panel and subsequently covered by the next adjoining panel during installation, and (2) exposed fasteners that are driven through each metal panel into the roof sheathing.

The attributes of metal roofing are impressive. A metal roof is:

  • durable and long lasting
  • requires little maintenance
  • easily retrofitted over many existing roofing materials or even extant roofs
  • available in a wide range of colors and styles to match your architecture
  • fire resistant – the highest Class A fire rating
  • Learn about DIY metal roofing project seminars

Visit a “Do It Yourself” Seminar to Learn How to Install Your Own Standing Seam Metal Roofing

Versatile Products that Resist Weather Extremes

Standing seam metal roofs are popular in areas diverse as the hot and humid South and frigid New England, where they have shed their industrial roots to become an architectural statement.

There is no material more capable of protecting a structure from wind, rain, hail, fire, or rot than a durable and energy-efficient metal roof. The initial cost to install may seem high, but the standing-seam metal roof cost is the most economical roofing option over the life of the roof because it is virtually maintenance-free and can last 50 years or more.

We Specialize in Standing Seam Metal Seam Roofing so Our Knowledge and Experience Will Be of Great Value to You.  Order All Your Roofing Supplies Direct from Metal Roofing Systems

Installation Service Is Available Throughout Southern Wisconsin

866-Wis-Metal (866-947-6382)
608-663-2687 Madison, WI
414-727-1810 Milwaukee, WI

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Metal Roofing Systems, Metal Roofs, Standing Seam Metal Roofing | No Comments »

Corrugated Sheet Metal Roofing

Thursday, November 11th, 2010

Corrugated Sheet Metal Roofing Is the Roofing of Choice for Discriminating Homeowners

Basic Benefits of Metal Roofing

Corrugated sheet metal roofing uses metal sheets as roofing materials that have a wave-like pattern with ridges and grooves. This pattern gives them extra strength, despite being lightweight. These corrugated metal roofing sheets are stronger than plain metal sheets.

Metal roofing has been around since 1850. Barns, sheds and industrial buildings with sheet metal roofing were a common sight. They were rarely used for residential purposes because of the most common drawback of corrugated sheet metal: rusting.

Metal Roofing Systems from WisMetalRoof are Environmentally Friendly

Today’s corrugated roofing sheets are available in copper, aluminum, zinc alloy and stainless steel. All these types vary in their features like durability, appearance and cost. Among them, aluminum is preferred the most for residential purposes, as it is inexpensive and extremely lightweight. These roofing materials are resilient and resistant to rust; and for better looks and a longer lifespan, they are coated and painted. Now, the modern versions of corrugated metal roofing are not only made resistant to rust and other natural elements, but are also “in sync” with the latest architectural trends. These features have helped a lot in its revival as residential roofing material.

Contact Us and Visit a DIY Seminar to Learn How to Install Your Own Corrugated Sheet Metal Roofing

Advantages of Installing Corrugated Sheet Metal Roofing

  • 1.    Durable – These roofing sheets can easily last for about 20 to 50 years.
  • 2.    Treated and Coated – This prevents the growth of algae and mildew. They are also resistant to rot, rust and insects.
  • 3.    Non-combustible – These sheets have a Class A fire rating, which is the highest rating as far as fire-resistance is concerned.
  • 4.    Lightweight – This facilitates easy installation and reduces the load on the roof structure
  • Residential sheet metal roofing is a perfect material for roofing. It is attractive, lightweight and durable, which fits into the criteria of most builders and house owners.

Our Corrugated Sheet Metal Roofs Come in Styles and Colors to Fit Any Home. Contact Us to Place an Order with Metal Roofing Systems Today.

866-Wis-Metal (866-947-6382)
608-663-2687 Madison
414-727-1810 Milwaukee

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Corrugated Sheet Metal Roofing, Metal Roof Tiles, Metal Roofing Systems, Metal Roofs | No Comments »

Aluminum Roofing Sheet

Thursday, November 11th, 2010

Aluminum Roofing Sheet Systems Enliven Their Surroundings

Aluminum Sheet Roofing in Madison and Milwaukee

An aluminum roofing sheet is extremely light with high-strength-to-weight ratio. This metal is becoming a popular choice for use in residential and industrial buildings. It is corrosion-resistant in almost any kind of environment. Even in highly-corrosive industrial environments, it is resistant to fumes and vapors of organic compounds and to chemicals like ammonia, carbon-dioxide and acids like hydrochloric acid, nitric acid and sulfuric acid. This corrosion-resistant property gives the metal a long life and keeps it looking good throughout its life.

A Permanent Aluminum Roof Will Add Instant Real Value to Your Home. Contact Metal Roofing Systems Today for More Information.

Variety and Style While Saving on Energy Costs

The shine and brightness of aluminum metal roofing (shingles or panels) enlivens its surroundings and because it doesn’t stain, discolor or rot. It looks bright and shiny for a long, long time. Aluminum sheet metal can take a variety of finishes, colors and textures, which protect it and add further to its appearance. It is easy to maintain and can be washed easily.

Though the metal is a good conductor of heat, its high reflectivity of radiant heat and light (75 to 80% when new, 60% after several years) keeps the interiors under an aluminum roof 5°- 8°F cooler in summer, while its low emission rate cuts heat loss during winter.

Learn About Our Do-It-Yourself Program at Metal Roofing Systems

Long-Term, Affordable Alternative to Traditional Roofs

Aluminum roofing has advanced over the past decade to include the do-it-yourself homeowner on the list of installers. Before this, only a qualified roofer could install aluminum roofing sheets because of the method of installation–sheets needed to be crimped or creased with high-cost tools. Nowadays, the same metal sheets are supplied to the public with everything in place for a quick and easy installation.

The long-term economic perspective is motivating people to look for better building material alternatives. And cost-effective aluminum metal roofing is an obvious great choice for discerning consumers for residential metal roofing. It is attractive, durable and long-lasting, which appeals to every homeowner.

We Specialize in Permanent Aluminum Metal Roofs. Contact Us Today to Place Your Order with Wisconsin’s Leading Metal Roofing Systems Provider.

866-Wis-Metal (866-947-6382)
608-663-2687 Local Calls in Madison
414-727-1810 Local Calls in Milwaukee

www.wismetalroof.com

Tags: , , , , , , , , ,
Posted in Aluminum Roofing Sheet, Metal Roofing Systems, Metal Roofs | No Comments »